What we can model and manufacture

Five different examples

1. 01

   Replacement drawer stop

   A measured end stop or guide for a discontinued drawer system.

   Check impact, screw position and why the original failed.
2. 02

   Vacuum-hose adapter

   A stepped coupling between an existing hose and a workshop or cleaning accessory.

   Confirm both diameters, seal, airflow and static risk.
3. 03

   Made-to-measure cupboard tray

   A compartment insert shaped around the real shelf, utensils or small items.

   Specify available volume, cleaning method and desired dividers.
4. 04

   Low-voltage cable guide

   A clip or route that keeps charging and data cables where they are needed.

   Define cable diameter, fixing surface and removal frequency.
5. 05

   Replacement control knob

   A new grip for a non-safety-critical household control with an intact shaft.

   Exclude hot zones and critical gas or mains controls.

Five different examples

1. 01

   Geometric vase sleeve

   A dry decorative shell placed around a separate watertight vessel.

   The printed shell itself is not presented as watertight.
2. 02

   Modular wall-relief tile

   Repeating shallow panels that build texture across a feature area.

   Plan fixings, wall condition, seams and removal.
3. 03

   LED-only sculptural shade

   A patterned shade designed around a cool-running certified LED fitting.

   Thermal clearance and the actual lamp still require review.
4. 04

   Display plinth for a collection

   A fitted base that supports and spaces small display objects.

   Record object footprint, centre of gravity and surface protection.
5. 05

   Original seasonal ornament

   A personalised hanging or standing form created without copying protected characters.

   Confirm rights, hanging method and storage conditions.

Five different examples

1. 01

   Irrigation-hose guide

   A rounded ground or wall guide that keeps a hose away from plants and corners.

   Avoid sharp edges; confirm UV, fixing and pulling force.
2. 02

   Ventilated planter feet

   Spacers that lift a specific pot and leave paths for drainage and cleaning.

   Check load, contact surface and long-term outdoor creep.
3. 03

   Weather-sensor radiation shield

   A ventilated housing concept for a low-voltage temperature or humidity sensor.

   Sensor accuracy and environmental sealing must be tested.
4. 04

   Greenhouse label system

   Reusable markers sized for a bed, tray or plant collection.

   Choose contrast, writing method and resistance to watering.
5. 05

   Covered garden-tool clip

   A holder for a defined hand tool in a sheltered outdoor storage area.

   Confirm tool weight, wall fixing and safe release.

Five different examples

1. 01

   Centre-console organiser

   A removable tray shaped to a measured storage pocket and daily objects.

   Keep controls, vents and driver movement unobstructed.
2. 02

   Interior charging-cable clip

   A small removable guide that prevents a cable dropping into a footwell.

   Confirm heat, adhesive, airbags and line of sight.
3. 03

   Labelled socket tray

   A bench or drawer organiser matched to a specific set of sockets.

   Measure each tool and plan pickup clearance.
4. 04

   Garage hose and nozzle holder

   A wall-mounted cradle for a defined cleaning hose or air nozzle.

   Validate wall fixing, hose load and safe edges.
5. 05

   Classic trim fit sample

   A prototype used to check the shape of an unavailable cosmetic interior trim piece.

   It is not represented as a certified vehicle replacement.

Five different examples

1. 01

   Assembly-positioning jig

   A shaped nest that holds two low-risk parts in a repeatable relationship.

   Define datum surfaces, clamping force and acceptable wear.
2. 02

   Drill-bit and driver organiser

   A bench block arranged around the exact tools used at one workstation.

   Include readable sizing and finger clearance.
3. 03

   Contoured hand-sanding block

   A reusable handle or profile matched to a recurring manual finishing task.

   Confirm abrasive attachment, grip and dust-cleaning routine.
4. 04

   Alignment spacer set

   Colour-coded gauges for a repeatable non-certified gap or offset.

   State tolerances and do not use as calibrated metrology.
5. 05

   Dust-hose adapter prototype

   A transition between known extraction ports for fit and airflow testing.

   Assess static, dust type and machine manufacturer requirements.

Five different examples

1. 01

   Development-board enclosure

   A vented case for a named low-voltage board, connectors and optional fan.

   Check heat, clearances, fasteners and electrical requirements.
2. 02

   Adjustable sensor bracket

   A mount that positions a small sensor at a repeatable angle or distance.

   Specify field of view, cable route and vibration.
3. 03

   Cable-entry guide

   A rigid insert with rounded edges that routes a known low-voltage cable.

   It is not automatically a certified cable gland, strain relief or seal.
4. 04

   DIN-rail fit prototype

   A clip geometry used to test assembly of a low-voltage prototype on a standard rail.

   Certification and final material remain outside the fit test.
5. 05

   Indoor camera or gateway case

   A serviceable enclosure with lens, status-light and connector openings.

   Respect cooling, privacy, radio and manufacturer guidance.

Five different examples

1. 01

   Modular stationery tray

   Interlocking trays sized for the pens, notes and tools actually used.

   Choose footprint, compartments and expansion direction.
2. 02

   Ventilated laptop stand

   An angled support matched to one device and a comfortable viewing setup.

   Validate weight, rubber contact points and cooling openings.
3. 03

   Clamp-on headset hook

   A removable under-desk hanger sized to the desktop thickness.

   Avoid controls, knees, veneer damage and excessive clamp force.
4. 04

   Phone and card dock

   A compact stand with a chosen viewing angle and pockets for daily cards.

   Specify device case, charging cable and portrait or landscape use.
5. 05

   Multi-cable comb

   A labelled guide that separates power, display and data cables at the desk edge.

   Match diameters and allow cables to be removed without damage.

Five different examples

1. 01

   Layered nameplate

   A freestanding or wall-mounted name composition with deliberate colour layers.

   Confirm spelling, fixing, size and permission for supplied marks.
2. 02

   Topographic keepsake

   A relief interpretation of a meaningful landscape from suitable map data.

   Source rights, scale and vertical exaggeration are documented.
3. 03

   Fitted gift-box insert

   A presentation insert shaped around a non-food object and its accessories.

   Measure the object and choose surface protection and removal tabs.
4. 04

   Reusable event place marker

   An original name or table marker designed for a particular event style.

   Agree quantity, readability, stability and reuse plan.
5. 05

   Authorised logo desk sign

   A dimensional sign for a customer who owns or may use the supplied identity.

   Trademark permission is confirmed before production.

Five different examples

1. 01

   Architectural massing model

   A simplified volume study used to discuss form, site and relative scale.

   Not a construction drawing or structural verification.
2. 02

   Original tabletop terrain

   Modular terrain designed from an original brief for painting and hobby use.

   Avoid protected settings unless the customer has permission.
3. 03

   Model-railway scenery accessory

   A scale platform detail, crate or landscape element for an adult hobby layout.

   Confirm scale, clearance and moving-train envelope.
4. 04

   Mechanical motion study

   An enlarged linkage or gear concept for demonstration and desk display.

   Not a child-safe toy or guarded production mechanism.
5. 05

   Scale-model display stand

   A stable, labelled support shaped around a collector model’s contact points.

   Check centre of gravity and protect delicate finishes.

Five different examples

1. 01

   Feeder rain hood

   A removable roof or baffle that protects an existing feeder from direct rain.

   Allow drainage, inspection and frequent cleaning.
2. 02

   Rounded replacement perch insert

   A measured insert for an observation feeder or suitable aviary fixture.

   Diameter, texture, edges and species welfare must be reviewed.
3. 03

   Nest-box camera bracket

   A low-voltage camera support located outside the usable nesting volume.

   Avoid trapping points, disturbance, heat and exposed wiring.
4. 04

   Measured seed scoop

   A labelled scoop for handling dry bird feed in a care routine.

   Cleanability and material suitability are confirmed; no food-grade claim.
5. 05

   Removable enrichment mount

   A rounded holder for a suitable, replaceable aviary enrichment item.

   Placement, chewing risk and supervision depend on the species.

Five different examples

1. 01

   Ergonomic handle variants

   Several grip sections compared for reach, comfort and control.

   The test group and evaluation question are defined first.
2. 02

   Snap-fit enclosure iteration

   Successive shell versions used to tune access, clips and assembly sequence.

   Record material, orientation and revision for every test.
3. 03

   Non-pressure manifold form model

   A geometry model used to discuss routing and connector access before another process.

   It is not approved for fluid pressure or final service.
4. 04

   Packaging fit-check insert

   A dimensional sample that tests how a product, cable and leaflet share a box.

   Use production packaging dimensions and compression allowance.
5. 05

   Presentation prototype

   A refined appearance model for a meeting, photograph or user discussion.

   Visual fidelity does not imply functional certification.

Five different examples

1. 01

   Serialized cable identifiers

   A batch of durable, readable markers built around known cable diameters.

   Sequence, contrast and installation method are checked.
2. 02

   Workshop fixture knobs

   Repeat handles for a defined low-risk jig after fit and torque testing.

   Approved geometry and material stay under version control.
3. 03

   Retail display stands

   A coordinated set of compact stands for one authorised product range.

   Sample first; then confirm stability, finish and packing.
4. 04

   Low-voltage sensor housings

   Repeat enclosures produced from an approved revision with defined openings.

   Electronics certification and environmental rating are separate.
5. 05

   Event tokens or markers

   Numbered, colour-coded pieces produced in a planned batch for an event.

   Count, artwork rights, sorting and packaging are agreed.