Indoor use and detail
Start with PLA Basic when you need stiffness, detail and predictable production.
Material library
3D printing materials
PLA Basic, PLA Matte and PETG HF suit different needs. Compare appearance, stiffness, impact, heat and moisture before the final recommendation.
01 — 05
Quick choice by context
Relative scales for comparison within this library; they do not replace a technical data sheet or testing of the actual part.
Matte appearance
Choose PLA Matte when the priority is lower gloss and visually softer layer lines.
Moisture and general functional use
PETG HF often offers a useful balance, but it is not presented as a solution for prolonged sun or weather exposure.
Permanent outdoor or intense UV exposure
No currently offered material is presented as a solution for this exposure; the project must be reviewed before any commitment.
Concept example
Visual examples of the service
Concept studies that make each possibility clear. Scope, source information, level of detail and deliverables are defined for every project.
01
Geometric vase sleeve
02
Modular drawer organiser
03
Draining bathroom organiser
04
Reusable plant marker
Concept example
Images created to explain design and manufacturing possibilities. They are not presented as completed customer work.
01
PLA Basic
Clean finish, good stiffness and predictable production for detail, prototypes and indoor parts.
Appearance and finish
Smooth surface with a slight sheen; layer lines remain visible at close range.
Practical behaviour
Rigid and dimensionally stable in normal indoor use, but can deform with heat and fracture under hard impact.
Strength3/5
Stiffness4/5
Flexibility1/5
Impact2/5
UV/outdoor1/5
Moisture2/5
Production ease5/5
Reference HDT*≈ 57 °C
Typical applications
- Indoor organisers
- Visual and fit prototypes
- Decorative objects and models
When not to choose it
There is meaningful heat, permanent sun, repeated impact or a specific regulatory requirement.
Advantages
- Crisp detail
- Good stiffness
- Efficient production
Limitations
- Low heat resistance
- Not for permanent outdoor use
- Limited impact resistance
Unit and repeat production
Suitable for one unit or repeat runs; colour, orientation and finish are confirmed in the proposal.
Colour catalogue and availability
- Jade whiteSmooth with slight sheenavailable
- YellowSmooth with slight sheenavailable
- Bambu greenSmooth with slight sheenavailable
- BrownSmooth with slight sheenavailable
- BlueSmooth with slight sheenavailable
02
PLA Matte
Matte appearance and fine texture for visual objects where lower gloss and less prominent layer lines matter.
Appearance and finish
Matte, finely textured and visually softened layer lines; actual colour can vary with lighting and batch.
Practical behaviour
Similar to PLA Basic in indoor use and chosen mainly for appearance; it should not be assumed to be mechanically superior.
Strength3/5
Stiffness4/5
Flexibility1/5
Impact2/5
UV/outdoor1/5
Moisture2/5
Production ease5/5
Reference HDT*≈ 55 °C
Typical applications
- Geometric decor
- Visual enclosures and organisers
- Models and presentation pieces
When not to choose it
Impact, heat, outdoor use or a completely smooth surface without post-processing is the priority.
Advantages
- Low gloss
- Less prominent layers
- Uniform appearance
Limitations
- Limited heat and UV
- Does not replace manual finishing
- Sample may differ from screen
Unit and repeat production
Useful for one-offs and small visual runs. Colour availability is always confirmed before production.
Colour catalogue and availability
- Matte ivory whiteFine-grain matteavailable
- Matte lemon yellowFine-grain matteavailable
- Matte marine blueFine-grain matteon request
- Matte tangerine orangeFine-grain matteon request
- Matte blackFine-grain matteavailable
03
PETG HF
A functional balance of durability, impact and moisture tolerance for general technical parts.
Appearance and finish
Smooth, matte texture with more even gloss than conventional PETG; support marks and orientation still depend on geometry.
Practical behaviour
Tougher than PLA and moisture tolerant, with some flex. It can suit sheltered, non-critical outdoor use after review, but it is not presented as a solution for prolonged UV or weather exposure.
Strength4/5
Stiffness3/5
Flexibility2/5
Impact4/5
UV/outdoor2/5
Moisture4/5
Production ease4/5
Reference HDT*≈ 69 °C
Typical applications
- Indoor technical enclosures
- Functional mounts
- Humid environments without permanent sun
When not to choose it
The part will remain in continuous sun, near high heat or requires food/medical certification.
Advantages
- Good toughness
- Moisture tolerance
- Versatile functional use
Limitations
- Finish may mark
- Permanent sun not recommended
- Tolerances depend on geometry
Unit and repeat production
Suitable for one-offs and functional runs after orientation, fit and finish are validated.
Colour catalogue and availability
- WhiteSoft matteon request
- GraySoft matteon request
- YellowSoft matteavailable
- RedSoft matteavailable
- BlueSoft matteon request
- OrangeSoft matteavailable
- GreenSoft matteavailable
- BlackSoft matteon request
Technical fit
Tell us what you need modelled or manufactured.
You do not need to know file formats, materials or 3D software. Explain the goal and attach whatever references you have.