Indoor use and detail
Start with PLA Basic when you need stiffness, detail and predictable production.
Material library
3D printing materials
PLA Basic, PLA Matte and PETG HF suit different needs. Compare appearance, stiffness, impact, heat and moisture before the final recommendation.
01 — 05
Quick choice by context
Relative scales for comparison within this library; they do not replace a technical data sheet or testing of the actual part.
Matte appearance
Choose PLA Matte when the priority is lower gloss and visually softer layer lines.
Moisture and general functional use
PETG HF often offers a useful balance, but it is not presented as a solution for prolonged sun or weather exposure.
Permanent outdoor or intense UV exposure
No currently offered material is presented as a solution for this exposure; the project must be reviewed before any commitment.
01
PLA Basic
A clean finish, good stiffness and consistent production for detailed parts, prototypes and indoor items.
Appearance and finish
Smooth surface with a slight sheen; layer lines remain visible at close range.
Practical behaviour
Rigid and dimensionally stable in normal indoor use, but it can deform with heat and fracture under a hard impact.
Strength3/5
Stiffness4/5
Flexibility1/5
Impact2/5
UV/outdoor1/5
Moisture2/5
Production ease5/5
Reference HDT*≈ 57 °C
Typical applications
- Indoor organisers
- Visual and fit prototypes
- Decorative objects and models
When not to choose it
Avoid where there is significant heat, continuous sunlight, repeated impact or a specific regulatory requirement.
Advantages
- Crisp detail
- Good stiffness
- Efficient production
Limitations
- Limited heat resistance
- Not suited to permanent outdoor use
- Limited impact resistance
Unit and repeat production
Suitable for a single item or repeat runs; colour, orientation and finish are confirmed in the quotation.
Colour catalogue and availability
- Jade whiteSmooth with a slight sheenavailable
- YellowSmooth with a slight sheenavailable
- Bambu greenSmooth with a slight sheenavailable
- BrownSmooth with a slight sheenavailable
- BlueSmooth with a slight sheenavailable
02
PLA Matte
A matte look and fine texture for visual objects where reduced gloss and less noticeable layer lines are preferred.
Appearance and finish
Matte with a fine texture and visually softened layer lines; the actual colour can vary with lighting and batch.
Practical behaviour
Similar to PLA Basic for indoor use and chosen mainly for its appearance; it should not be assumed to be mechanically superior.
Strength3/5
Stiffness4/5
Flexibility1/5
Impact2/5
UV/outdoor1/5
Moisture2/5
Production ease5/5
Reference HDT*≈ 55 °C
Typical applications
- Geometric decor
- Visual enclosures and organisers
- Models and presentation pieces
When not to choose it
Avoid when impact, heat or outdoor resistance is the priority, or when a completely smooth surface without post-processing is required.
Advantages
- Low gloss
- Less prominent layer lines
- Consistent appearance
Limitations
- Limited heat and UV resistance
- Does not replace manual finishing
- The result may differ from the screen
Unit and repeat production
Useful for one-offs and small visual runs. Colour availability is always confirmed before production.
Colour catalogue and availability
- Ivory whiteFine-grain matteavailable
- Lemon yellowFine-grain matteavailable
- Marine blueFine-grain matteon request
- Tangerine orangeFine-grain matteon request
- BlackFine-grain matteavailable
03
PETG HF
A functional balance of toughness, impact resistance and moisture tolerance for general-purpose technical parts.
Appearance and finish
Smooth, matte texture with a more even sheen than conventional PETG; support marks and orientation still depend on the geometry.
Practical behaviour
Tougher than PLA and moisture tolerant, with some flex. It may suit sheltered, non-critical outdoor use after assessment, but is not presented as a solution for prolonged UV or weather exposure.
Strength4/5
Stiffness3/5
Flexibility2/5
Impact4/5
UV/outdoor2/5
Moisture4/5
Production ease4/5
Reference HDT*≈ 69 °C
Typical applications
- Indoor technical enclosures
- Functional mounts
- Humid environments without permanent sun
When not to choose it
Avoid if the part will remain in continuous sun, sit near high heat, or requires food-contact or medical certification.
Advantages
- Good toughness
- Moisture tolerance
- Versatile functional use
Limitations
- The surface may mark
- Permanent direct sun is not recommended
- Tolerances depend on geometry
Unit and repeat production
Suitable for one-offs and functional runs after orientation, fit and finish have been assessed.
Colour catalogue and availability
- WhiteSoft matteon request
- GreySoft matteon request
- YellowSoft matteavailable
- RedSoft matteavailable
- BlueSoft matteon request
- OrangeSoft matteavailable
- GreenSoft matteavailable
- BlackSoft matteon request
Technical fit
Tell us what you need modelled or manufactured.
You do not need to know file formats, materials or 3D software. Explain the goal and attach whatever references you have.